Тема начата ZHOU Kun
ZHOU Kunдобавил новый фотоальбом.
114 26 October 2024, 12:29
ZHOU Kun АвторThank you @Taylor Durbon @Oleg Bogolei
The pilots are 3D printed by my friend. The pilots are wearing HGU-55P helmets which are too modern for an A-6A aircraft, anyway I decided to use them. I dont have better pilots at hand. @DerMattes
1 30 October 2024, 11:00
Sergej IGreat stuff, will you be also addressing the wrongly placed inboard fins on top of the wings? Trupeter did a decent mistake there...
8 January, 18:45
ZHOU Kun Автор@Sergej I I am looking into it. Removing the fences on the kit is easy. The problems comes when one wants to make a fence with plastic sheet accurately🙂
1 9 January, 10:18
ZHOU Kun Автор@Nicolas @Chris T. An @Akaidada Thank you! I am building with my insufficient spare time. Hope to make more progress as soon as possible!
@Hangming Zhang 过奖了！
9 January, 10:20
ZHOU Kun Автор@Sergej I Hello! The inboard wing fences are correct for A-6A models. If you want to build an A-6E instead, you may have to move the fences inward.
17 January, 05:34
Oleg BogoleiDont you want to bay this?
aliexpress.com/item/..078.1005006374265987
1 17 January, 08:21
Sergej IKun, thank you for this reply. 👍 Now I understand where Trupeter made a shortcut. I have the E version to build... Will need to find a soul to model and print me new ones 🙂
1 17 January, 12:32
ZHOU Kun Автор@Skyhiker I have added notes to the photos. May be helpful if you want to make a decent A-6 model out of 72nd scale version of Trumpeter A-6 Intruder
1 17 April, 02:07
MartinAwesome work as always! Question on picture 103 "Removing the mould lines on canopy and tweaking of windscreen": how did you end up closing those gaps between canopy and airframe? I can never find a solution. Did you sand the canopy or the airframe? Did you add plastic to airframe? This is always my nightmare!
14 October, 15:53
ZHOU Kun Автор@Martin The canopy fitted with the fuselage decently. Problems came about when I close the wind screen, since the glare shield of the instrument panel was a bit too high. So I sanded the instrument panels on the top edge to make the windscreen fit. Once the windscreen problem is settled, the canopy can go into right place without much difficulty
23 November, 04:22
ZHOU Kun Автор@Martin As for picture 103, I was sanding the injection trunks right ahead of the windscreen, as they interfered the fitting
23 November, 04:25