T-80 Workable Track Links

Aaron
These tracks will fit the Trumpeter T-80 wheels and sprockets, requiring 76 track links per side.

You have to be careful cutting them off of the sprues (I don't recommend clippers as the tension broke a few of the pins on some of the tracks) and then the track horns in between the track links clip the tracks together, then the rubber bushings on the outside of the tracks hold everything in place. Assembly is honestly pretty easy (I didn't use the included jig as it didn't seem to work well for me either time) and I was able to click together a few links at a time and then come back through and slide the rubber bushings on to hold the tracks together.

Cleanup is pretty minimal, and I didn't bother really doing it on the rubber pieces at all since they'll be covered in dirt and clipped off pretty cleanly anyhow. I would recommend these to anyone who doesn't want to bother with the link-and-length tracks even though the majority of these tracks will end up being hidden under the side skirts.

Top Agent PGG jr.
This track set can also be used on the Amusing Hobby T-80 which I tested after purchasing this set to replace the tracks from the original kit (broke the kit tracks). If used, 76 track links are required on each side instead of 80 as stated on the Amusing Hobby T-80 instructions.