Wall
Wall
Grendizer Zerowants this item
Soviet strike-reconnaissance bomber-missile carrier T-4 «Sotka»
Arma Models 1:72
AM72509 2025* New tool 28 November, 06:27
November 26, 2025
Grendizer Zeroadded a new photoalbum.
12 images
Typhoon - Hobby Boss - 1/350
1:350
This is my first submarine build. It is not 100% finished, I still have to add a wood effect to the plaque, add the titl...
Project: Rusting Typhoon
Scratchbuilt
All comments (5) » 10 10 August 2024, 06:28
November 1, 2025
Grendizer Zeroadded a new photoalbum.
8 images
MyAlbum
1:600
a tale of two tails. The F-4 on the kit leaves something to be desired, the tail is just wrong. I cut the front portion ...
Project: USS Enterprise CVN-65
3 31 October, 04:36
Grendizer Zero Authorthe F-4 from the kit (far left) with a tail as long as the 747 (from previous pictures) with the modifications. Canted elevators, corrected tailfin, and upwards canted wings
1 November, 05:04
October 31, 2025
October 30, 2025
October 29, 2025
October 28, 2025
Grendizer Zerowants this item
F4D-1 "Skyray" interior set
CMK (Czech Master Kits) 1:48
4040 28 October, 05:33
October 25, 2025
October 18, 2025
October 10, 2025
Grendizer Zerowants this item
MiG-21bis (late) Fishbed-N interior 3D decals (with 3D resin parts) for Eduard
Quinta Studio 1:72
QD+72240 2025 New tool 10 October, 13:42
October 8, 2025
MikroMir 1:72
September 28, 2025
September 11, 2025
September 4, 2025
September 3, 2025
August 30, 2025
Grendizer ZeroThis is a very strange kit which I bought direct from HLJ (Hobby Link Japan) sometime between 2012-2016. It does not follow what I know to be any Tamiya standard. It features a completely black box. It does not have the front page of the instructions, where usually the history of the car is given. It does not have a last page, which usually contains decal placement, here the decal placement is a part of the build page ((after step 16 in the instructions.
I do recall that when I bought it from HLJ, it was labelled either as a "special edition" or "black edition" or "stealth edition". I only noticed it recently when I was making an inventory of the kits I have.
The barcode of the product gives it as 896233 (note that an additional 3 has been placed after the 89623, but not separate by a bar, it is part of the sequence).
All in all, I was trying to verify the kit, and when I found this specific entry for the McLaren Honda MP4/5B without a box art picture, no instructions, and almost no one owning it listed, but had a [matching] product SKU, I knew it was this kit.
I do not think this is a fake product, as I bought it from a reputable supplier (HLJ), along with other Tamiya kits at the time, including the Ferrari F310B, and the Honda RA272, but it is a strange kit.
1 29 August, 10:49
George WilliamsI'm guessing it's something to do with complying with the sponsors' copyright.
1 29 August, 12:55
Grendizer Zero AuthorInteresting thought, it is worth contemplating. I have also considered the possibility of a freak production batch, which does happen in other industries. But in some cases, the manufacturer sees it as a marketing opportunity and re-brands it as "Black Edition" or "Limited Run" and sells them, rather than scrap them.
Looking at the successors to this kit, you will see that they also feature a black box, with only line art of the car on them, unlike the traditional Tamiya kits.
30 August, 06:36
August 29, 2025
July 17, 2025
June 27, 2025
June 24, 2025
June 1, 2025
May 27, 2025
May 21, 2025
April 10, 2025
Grendizer Zerowants this item
Blohm & Voss Bv-38 Flying Wing Movie: Raiders of the Lost Ark
Black Sun Models 1:72
2007 New tool Multi-topic (3)10 April, 07:45
Grendizer Zerowants this item
Short Solent Float and Propeller Set (four 3-blade and four 4-blade) Produced by Avon Precision Minatures
JAYS Model Kits 1:200
JY0428 10 April, 07:42
April 9, 2025
March 14, 2025
Grendizer Zeroadded a new photoalbum.
6 images
Airbrush quick connect issues
Three air brushes, two types of quick connect. The quick connect one on the right fits the airbrush, but not the hose. T...
All comments (11) » 1 12 March, 20:32
Grendizer Zero Author@Spanjaard, thank you for the video, yes. This solves the issue with badger airbrushes, which I have one of. The dilemma I have is again slightly different. The picture you sent above helps shed light on the issue. Thank you
14 March, 10:25
March 12, 2025
Grendizer ZeroHello all,
I have multiple airbrushes, and it is time to have a quick connect setup. But I am confused. I have a badger 1/8" air hose from my compressor, which is threaded on to the badger airbrush. The other airbrushes I have an adapter that reduces the 5/16" size to 1/8". I have not found any quick connect adapters for 5/16", nor did I find a quick connect adapters the convert a 1/8th quick connect to a 5/16" (the opposite case).
I am thoroughly confused
I have multiple airbrushes, and it is time to have a quick connect setup. But I am confused. I have a badger 1/8" air hose from my compressor, which is threaded on to the badger airbrush. The other airbrushes I have an adapter that reduces the 5/16" size to 1/8". I have not found any quick connect adapters for 5/16", nor did I find a quick connect adapters the convert a 1/8th quick connect to a 5/16" (the opposite case).
I am thoroughly confused
12 March, 20:31
March 6, 2025
February 28, 2025
February 16, 2025
wnolder.php?lang=en
2025-02-16 11:08:11
2024-01-31 12:24:39
138490
/ajax/wnolder.php?lang=en&sd=2025-02-16 11:08:11&md=2024-01-31 12:24:39&filter=&w=138490
todo
