Mur

Mark de Boer
Beautifull, awesome work. Great display.

Roland Sachsenhofer Auteur
Thank you for this comment- very appreciated, mate!

Roland Sachsenhofer Auteur
There has been a little progress with Fulmar and...

Roland Sachsenhofer Auteur
A few steps forward- and no longer entirely up to date: today I was able to apply the decals, and construction is progressing very smoothly and without any problems so far.

Bernd Grün
Outstanding build, Roland! 👌👌 Congratulation.

Roland Sachsenhofer Auteur
Thank you for digging out these "oldie", Bernd! As a matter of fact that´s a fabolous Airfix kit; I am going for a second round, this time as a BOAC Whitley.

Roland Sachsenhofer Auteur
A few new pictures of the Firefly; slowly but surely, we're starting to see recognisable shapes! Have I mentioned that I really like these Special Hobby kits? Down-to-earth, stable shapes, useful components, and there's no shortage of fun to be had with the putty!

Roland Sachsenhofer Auteur
...Progress on the Firefly too! Installing the clear parts was the only weak point in both kits so far, both here and with the Fulmar. Well, it was quite a challenge... 🙂

Gabriel Barco
Felicitaciones. Muy buen trabajo.

Roland Sachsenhofer Auteur
I like 'blast from the past'! 🙂 Thank you for your encouraging comments, mates!

Roland Sachsenhofer Auteur
This project has been running for some time now alongside other ventures that have excited me more, but now it's finally happening here too! With these pictures, I'll show you a short time-lapse of the construction steps. The last sequence is no longer entirely up to date, as wear and tear has since been added and the undercarriages have been installed. The generator card, a 3D print, is also running. Its surfaces still need to be properly finished.

Roland Sachsenhofer Auteur
Finally finished! This G-14 from Hasegawa has undergone a few enhancements. The fuselage armament is made of brass, as is the pitot tube. In the cockpit, the G-14's typical angular storage extension behind the seat has been recreated in plastic, and the antenna under the left wing has also been retrofitted. The various scoops on the engine cowling have been enlarged or completely re-drilled. I hope you like the pictures. I'm quite happy to have a late 109 in unusual colours in my collection!

Roland Sachsenhofer Auteur
With these pictures, I declare the 'Almaz' project complete 🙂 In addition to showing it in dry dock, I also wanted to show the deep-sea submarine in its natural habitat. To do this, I improvised a deep-sea diorama, or rather a deep-sea photo backdrop, using leftover etched parts, a cardboard roll and some aluminium foil. Everything was to be staged in the dimly lit blackness of the depths, where more hints than concrete and clear figures would tell the story.... The submarine spotlight is my contribution with Photoshop, the rest was achieved with appropriate camera settings.

Roland Sachsenhofer Auteur
I just noticed that the images are very dark, so I've made them a little brighter. I hope this improves visibility on your screens! 🙂

Juergen Klinglhuber
Nice project Roland. Like it!

Roland Sachsenhofer Auteur
Hello Jürgen, I'm glad you like my attempt! 🙂

Timmie
Great result. I can imagine the gent would be very content recieving such beauty

Roland Sachsenhofer Auteur
Thank you! Indeed, he seemed quite pleased 🙂 Thank you for your words!

gorby
What a load of rubbish!
Fantastic work Roland.

Roland Sachsenhofer Auteur
Thank you Gorby! 🙂

Roland Sachsenhofer Auteur
I would like to show the submarine in two different settings: firstly, here in my 'multi-use' dry dock 🙂, and secondly, in the darkness of the deep sea.
This small, approximately 30-metre-long nuclear submarine can dive to depths of up to 1,000 metres and has gripper arms under the bow for manipulating objects on the sea floor. Exciting and a beautiful template for a few staged photos and a nice diorama!

Roland Sachsenhofer Auteur
A few pictures of the 3D printed model to show the precision and fineness of the print. There won't be many more construction photos!

Dave Flitton
Really nice build!

Roland Sachsenhofer Auteur
I am quite impressed and, of course, delighted by your reactions—thank you very much! That makes me happy and motivates me! 🙂

KyMustang
Impressive build!

Roland Sachsenhofer Auteur
Thank you mate!

Juergen Klinglhuber
TipTop Resultat ! 👍

Roland Sachsenhofer Auteur
Danke Jürgen!

Neuling
Another funny surprise from your bench ......... 🙂

Roland Sachsenhofer Auteur
Thank you for reactions and comments, mates! 🙂

Roland Sachsenhofer Auteur
What a story! It's fascinating to hear what an impression the Nautilus made compared to contemporary boats. Thank you for the praise and thoughts of a former submariner – I am honoured!

John Ballman
Your Welcome, it's another free service I provide.
JB

Roland Sachsenhofer Auteur
The USS Nautilus model is now complete. I had the following idea for presenting the model: since, in my personal opinion, a submarine model on its own doesn't look like much and I want to showcase it in a way that really highlights what I like about these vehicles, so there are two presentation versions. You can see the first one here:
I have set up a dry dock that can generally serve as a backdrop for submarines and ships on a scale of 1:350. To do this, I scanned a display from Coastal Kits on a scale of 1:144, reduced it to 1:350, printed it out and cut it up so that I could build it spatially. The landscape background is designed for changing harbour architectures and can be exchanged. The rest is a photographic game with a low horizon line, exposures and colour accents. Of course, the whole thing is only an approximation of the original and is just intended to place the boat in an atmospheric setting.

A second and final presentation has now been made and is featured in a separate gallery post: 'Full speed ahead on the high seas' 🙂 The pictures can be viewed in a separate post.

bughunter
Ja Ja, war nur ein Spaß - schönes Modell 👍

Roland Sachsenhofer Auteur
Danke 🙂 😊

Hans-Jürgen Haag
Fantastic result! 👍🥰

Roland Sachsenhofer Auteur
Thank you very appreciated, Hans-Jürgen!

Michael Kohl
Mit was hast Du die Details gebaut? Messing oder Plaste?

Roland Sachsenhofer Auteur
Hello Michael, system of mirrors on the bow: Steel wird and etched parts, all the others detailing with 'silver wire'. Die Konstruktion am Bug mit Stahldraht und Fotoätzteilresten, alles andere mit Silberdraht

Neuling
🙂

Roland Sachsenhofer Auteur
Wow, actually, "papermates" really does exist! Very cool, I didn't know that... 🙂 However, the propeller is made of plastic, so it's a real border crosser, a model amphibious, so to speak.
Thank you for your words!

Mike Siemers
Nice job on the NMF. That is so 😎

Roland Sachsenhofer Auteur
Thank you very much for your responses to the 'lifting body' – encouraging, mates!

Guy Rump
Very impressive build! 👍

Roland Sachsenhofer Auteur
Thank you Guy!

Jennifer Franklin
It really is pretty. That is a beautiful shade of red.

Roland Sachsenhofer Auteur
Thank you for your appreciated words, Jennifer!

Michael Kohl
Wow. Stunning teaser. Pitty that almost all the glow is covered now. Maybe to put some in front of the spray.

Roland Sachsenhofer Auteur
Thank you very much for this motivating feedback! I must say, Michael, I felt the same way, that I actually wanted to see more of the embers. But that gave me an idea that I will implement with the next firefighting project, two AF-2 'Guardian' fire bombers: I will simply fly them over a styrofoam inferno without dropping any water – it could actually look quite good 🙂
Thanks for the suggestions, mates!

Neuling
Very nice!

Roland Sachsenhofer Auteur
Thank you for your encouraging words, mates!

Roland Sachsenhofer Auteur
I would like to show you this Cushman 32 from the manufacturer FCM as a small, already completed side project. My second two-wheeler as a 3D printer model. FCM delivers decent quality, even if the "sprues" are sometimes in adventurous places and the layer structure of a print cannot be denied everywhere.
The small scooter, originally developed for the Paras, was widely used on airfields and stations - a useful prop for large aircraft models in 1:24!
Hardy and Hardy from Black Dog were again kind enough to pose for a size comparison.

Mark K
Very nice!

Roland Sachsenhofer Auteur
Thank you Mark!

bughunter
Impressive result 👍 and nice that you are back in "full speed mode" 🙂

Roland Sachsenhofer Auteur
Thank you for your appreciated words! Yes, it feels good to slowly 'get back on track' 🙂